HOW IT WORKS:

• Simply plug the module into your vehicle's OBD port. The red light will flash for about 5 seconds while it boots. It will blink green when it is ready. 
• Pull the high beam stalk back for 5 seconds to activate it. You'll know it's turned on when the high beam indicator is active. If your vehicle is equipped with a dashboard screen it will display the Z-Flash pattern that you are currently using.
• To turn it off pull the high beam stalk for two seconds.

Jump in Activation: When starting your vehicle pull the high stalk to instantly turn on the lights. 

Key Fob Activation: Use the key fob to activate your lights by pressing the lock then unlock then unlock again. Wait about 1 second between each press.

Pattern Changing: Use the steering wheel controls to change between each pattern. Patterns can be enabled or disabled in the software.

2018 MODEL YEARS:

All 2018 model year vehicles will require an additional gateway module. Simply unplug the security module from your vehicle and plug in the gateway module. The module is under the dash by the vehicle's pedals. Except for the Ram, the module is behind the radio. Instructions are included and most people can complete the installation in under 30 minutes. 

FAQS:

• How does it work?: Using diagnostic signals the module tells the vehicle to activate the respective lights. The module does not rewrite computer code or effect the vehicle. The codes are the same that the dealer could use to diagnose your vehicle. 
• Will this burn my computer?: The module does not put out any voltage and will not burn up the computer. It's much like plugging a USB stick into your PC.
• Will my brake lights still work?: Your brake and turn signals will override the flashing pattern. If the module is active and you hit the brakes or use your turn signal, that function will override. This cannot be disabled as it is an important safety feature. 
• Does this put my vehicle in reverse?:  The module will not change your vehicles gears. However, some vehicle's may activate the backup camera screen because they are wired in with the reverse lights. Unfortunately this cannot be disabled at this time. 
• Will this burn up my bulbs?: Like any headlight/taillight flasher it will burn out your bulbs faster than normal. Aftermarket HIDs will burn up very quickly because the ballasts are not intended to flash.
• My bulb is not flashing or very dim: Unlike LEDs, Halogen bulbs require a charge up and cool down time. Because of this is is not possible to flash them as fast as LED bulbs. Try using a custom pattern to slow the flash rate down.
• Is the module traceable?: Once removed, the module does not leave any trace of being installed. For 2018 model years be sure to remove the gateway module and reconnect the vehicle's security module before attempting to connect an OBD-II scanner or before having the vehicle serviced. Leaving the gateway module installed will prevent an OBD-II scanner from operating properly. 

COMPATIBILITY LIST

I’m a Return and Refund policy. I’m a great place to let your customers know what to do in case they are dissatisfied with their purchase. Having a straightforward refund or exchange policy is a great way to build trust and reassure your customers that they can buy with confidence.